Subaru's zijn permanent 4wd...die zekering plaats je bijvoorbeeld als je bij de APK op een remmenbank de remmen test of als je met een thuiskommertje rijd.
Forced FWD Switch
The FWD switch changes the driving mode from AWD to FWD, and should be
used for diagnostic purposes only. Do not drive the vehicle in this mode. The FWD
switch is located on the left front shock tower. The Legacy FWD switch is located
on the right strut tower. It is activated by inserting the spare fuse into the underhood
connector. The FWD light on the combination meter verifies that the vehicle
is in FWD.
Maintenance Precautions
Before jacking up one or two wheels for maintenance with the engine running
or before running the vehicle on a chassis dynomometer, the electronic AWD
engagement system MUST be disengaged by installing the spare fuse (15A) of the
fuse box into the FWD connector located under the hood. Failure to do so could
result in movement of vehicle.
(Refer to owner’s manual.)
(All AWD AT non-turbo models without
Vehicle Dynamics Control system) Before
driving your vehicle with the temporary
spare tire, put a spare fuse inside
the FWD connector in the main
fuse box located in the engine compartment
and confirm that the Frontwheel
drive warning light “AWD” in the
combination meter comes on. The all
wheel drive capability of the vehicle
has now deactivated. After re-installing
the conventional tire, remove the spare
fuse from the FWD connector in order
to reactivate all wheel drive.
https://www.google.no/search?client=fir ... Sf8yuyWoXs